If you own a 2015 Ford F150, it’s important to know the correct oil type, capacity, and filter for your specific engine.
Using the correct oil and filter can help your engine run smoothly and extend its lifespan.
In this article, we will discuss the oil type, capacity, and filter for each of the four engine options available in the 2015 Ford F150.
2015 Ford F150 Oil Type, Capacity, & Filters (All Engines)
| Engine | Oil Capacity, incl. Filter | Oil Type | Filter |
|---|---|---|---|
| 2.7L EcoBoost V6 | 6.0 qt (5.7L) | SAE 5W-30 | FL-2062 |
| 3.5L Ti-VCT V6 | 6.3 qt (6L) | SAE 5W-20 | FL-500-S |
| 3.5L EcoBoost V6 | 6.0 qt (5.7L) | SAE 5W-30 | FL-500-S |
| 5.0L Ti-VCTV8 | 7.7 qt (7.3L) | SAE 5W-20 | FL-500-S |
It’s important to note that these capacities include the filter as well. Be sure not to overfill your engine with too much oil, as this can cause damage.
Engine Oil Types
Motorcraft SAE 5W-20 Motor Oil
Amazon Affiliate Link
Motorcraft SAE 5W-30 Motor Oil
Amazon Affiliate Link
Oil Filters
Motorcraft FL-500-S Original Oil Filter
Amazon Affiliate Link
Motorcraft FL-2062 Oil Filter
Amazon Affiliate Link
The need for this guide, specifically for the 2015 F150 engine oil, is because this truck is available in many different configurations, trims, and engine options. This creates confusion about the engine oil capacity, type, and filter.
Read on for more information and engine oil specifications by each 2015 F150 engine type. After reading this guide, you’ll get everything you need to change your 2015 F150 engine oil and filter.
All this information is researched and put together from the official Ford resources, including the 2015 Ford F-150 Owner’s Manual and Ford.com.
Table of Contents
- 2015 Ford F150 Engine Options
- 2.7L EcoBoost V6 Engine
- 3.5L V6 Engine
- 3.5L EcoBoost V6 Engine
- 5.0L V8 Engine
- Selecting the Right Engine Oil and Filter for Your 2015 Ford F150
- 2015 Ford F150 Engine Oil Check: A Step-by-Step Guide
- Adding Engine Oil to 2015 Ford F150: Best Practices
- 2015 Ford F150 Oil Change Interval: Ford Recommendation
- 2015 Ford F-150 Oil & Filter Change Video
- FAQs
2015 Ford F150 Engine Options
The 2015 Ford F150 offers four engine options:
- 2.7L EcoBoost V6
- 3.5L Ti-VCTV6
- 3.5L EcoBoost V6
- 5.0L Ti-VCTV8
Each engine requires specific oil and filter specifications for optimal performance.
2.7L EcoBoost V6 Engine
The 2.7L EcoBoost V6 engine in the 2015 Ford F150 has a total oil capacity of 6.0 quarts (5.7 liters) and requires Motorcraft SAE 5W-30 Premium Synthetic Blend Motor Oil. The recommended oil filter for this engine is the Motorcraft FL-2062.
Motorcraft FL-2062 Oil Filter
Amazon Affiliate Link
Motorcraft SAE 5W-30 Motor Oil
Amazon Affiliate Link
It’s important to note that using the correct oil viscosity is crucial for the 2.7L EcoBoost engine. If you use an oil with a different viscosity, it may affect the engine’s performance and fuel efficiency.
3.5L V6 Engine
The 3.5L Ti-VCT V6 engine in the 2015 Ford F150 has a total oil capacity of 6.3 quarts (6 liters) and requires Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil. The recommended oil filter for this engine is the Motorcraft FL-500-S.
Motorcraft FL-500-S Original Oil Filter
Amazon Affiliate Link
Motorcraft SAE 5W-20 Motor Oil
Amazon Affiliate Link
Using the correct oil and filter for this engine is important to maintain its performance and longevity. If you use an oil with a different viscosity, it may result in decreased fuel efficiency and increased engine wear.
3.5L EcoBoost V6 Engine
The 3.5L EcoBoost V6 engine in the 2015 Ford F150 has a total oil capacity of 6.0 quarts (5.7 liters) and requires Motorcraft SAE 5W-30 Premium Synthetic Blend Motor Oil. The recommended oil filter for this engine is also the FL-500-S.
Motorcraft FL-500-S Original Oil Filter
Amazon Affiliate Link
Motorcraft SAE 5W-30 Motor Oil
Amazon Affiliate Link
Like the other engines, it’s important to use the correct oil and filter for the 3.5L EcoBoost engine to ensure optimal performance and longevity. Using an oil with a different viscosity can affect the engine’s performance and fuel efficiency.
5.0L V8 Engine
The 5.0L Ti-VCT V8 engine in the 2015 Ford F150 has a total oil capacity of 7.7 quarts (7.3 liters) and requires Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil. The recommended oil filter for this engine is also the Motorcraft FL-500-S.
Motorcraft FL-500-S Original Oil Filter
Amazon Affiliate Link
Motorcraft SAE 5W-20 Motor Oil
Amazon Affiliate Link
Using the correct oil and filter for the 5.0L Ti-VCT V8 engine is important to maintain its performance and prolong its lifespan. Using an oil with a different viscosity may impact fuel efficiency and engine performance.
Ford recommends using engine oils and filters manufactured by Motorcraft, the official vehicle part brand of Ford.
It is important to avoid using SUPPLEMENTAL ENGINE OILS additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
Selecting the Right Engine Oil and Filter for Your 2015 Ford F150
One of the essential components of engine maintenance is selecting the right engine oil and filter for the 2015 Ford F150.
In this section, we will discuss the steps involved in selecting the right engine oil and filter.
| Engine | Oil Capacity, incl. Filter | Oil Type | Filter |
|---|---|---|---|
| 2.7L EcoBoost V6 | 6.0 qt (5.7L) | SAE 5W-30 | FL-2062 |
| 3.5L Ti-VCT V6 | 6.3 qt (6L) | SAE 5W-20 | FL-500-S |
| 3.5L EcoBoost V6 | 6.0 qt (5.7L) | SAE 5W-30 | FL-500-S |
| 5.0L Ti-VCTV8 | 7.7 qt (7.3L) | SAE 5W-20 | FL-500-S |
Use API-Certified Oils:
To ensure proper engine performance and protection, only use engine oils certified for gasoline engines by the American Petroleum Institute (API).
An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Council (ILSAC), which is comprised of U.S. and Japanese automobile manufacturers.
2015 Ford F150 Engine Oil Check: A Step-by-Step Guide
Regularly checking the engine oil level of your 2015 Ford F150 is essential to maintaining the performance and longevity of your vehicle. In this guide, we will provide a step-by-step process for checking the engine oil level.
Step 1: Ensure Level Ground Before starting the engine oil check, ensure that your vehicle is parked on level ground.
Step 2: Wait for Oil Drain Switch off the engine and wait for at least 15 minutes to allow the oil to drain into the oil pan.
Step 3: Set Parking Brake Set the parking brake and ensure the gearshift is in the park (P).
Step 4: Open Hood Open the hood of your vehicle, and take precautions to protect yourself from the engine heat.
Step 5: Locate the Engine Oil Dipstick Locate the engine oil level dipstick, which can be found according to the Under Hood Overview of your vehicle.
Step 6: Wipe and Check Dipstick Carefully remove the engine oil level dipstick and wipe it clean. Then insert the dipstick fully and remove it again.
- If the oil level is between the lower and upper holes, it is acceptable and does not require additional oil.
- If the oil level is below the lower hole, add enough oil to raise the level between the lower and upper holes.
- If the oil level is above the upper hole, this may cause engine damage, and you should have some oil removed by an authorized dealer.
Step 7: Replace Dipstick Put the engine oil level dipstick back into the oil dipstick tube and ensure it is fully seated.
Adding Engine Oil to 2015 Ford F150: Best Practices
If you find that your engine oil level is below the normal range, follow these steps to add engine oil to your 2015 Ford F150.
Step 1: Do Not Remove the Filler Cap or Dipstick During Engine Operation Do not attempt to add oil while the engine is running, as this may cause injury or damage to the engine.
Step 2: Use Ford Specifications Only use engine oil that meets Ford specifications.
Step 3: Check Engine Oil Level Check the engine oil level to ensure it is below the normal operating range on the engine oil level dipstick.
Step 4: Add Oil and Wipe Remove the engine oil filler cap and use a funnel to add the recommended engine oil into the opening. Wipe off any spilled oil.
Step 5: Recheck Engine Oil Level Recheck the engine oil level to ensure it is not above the normal operating range on the engine oil level dipstick.
Step 6: Replace Dipstick Install the engine oil level dipstick and ensure it is fully seated.
Step 7: Replace Filler Cap Fully install the engine oil filler cap by turning it clockwise until you hear three clicks or until it is fully seated.
2015 Ford F150 Oil Change Interval: Ford Recommendation
The 2015 Ford F150 has a recommended oil change interval of every year or 10,000 miles (16,000 km) according to Ford.
It’s important not to exceed this limit between oil change intervals, and this applies to all engine options.
However, this interval may change depending on the conditions in which the truck is used.
Under normal use conditions, the oil change interval ranges from every 7,500 to 10,000 miles (12,000 – 16,000 km).
Normal use may include highway driving with passengers, moderate load/trailer towing, flat to moderately hilly road driving, and no extended idling.
Under severe usage conditions, the oil change interval ranges from every 5,000 to 7,500 miles (8,000 – 12,000 km).
Severe use may include moderate to heavy load or towing, mountainous or off-road driving, extended idling, and extended hot or cold operations.
Under extreme usage conditions, the oil change interval ranges from every 3,000 to 5,500 miles (5,000 – 8,000 km).
Extreme use may include maximum load or towing and extreme hot or cold operation.
It’s important to note that following these intervals will help maintain the health and longevity of the engine in the 2015 Ford F150.
2015 Ford F-150 Oil & Filter Change Video
FAQs
What type of oil does a 2015 Ford F150 take?
The recommended oil type for a 2015 Ford F150 depends on the engine type. The 2.7L EcoBoost V6 and 3.5L EcoBoost V6 engines use SAE 5W-30 oil, while the 3.5L Ti-VCT V6 and 5.0L Ti-VCT V8 engines use SAE 5W-20 oil.
How many quarts of oil does a 2015 Ford F-150 take?
The oil capacity for a 2015 Ford F-150 depends on the engine type. The 2.7L EcoBoost V6 and 3.5L EcoBoost V6 engines require 6.0 quarts (5.7 liters) of oil, the 3.5L Ti-VCT V6 engine requires 6.3 quarts (6 liters) of oil, and the 5.0L Ti-VCT V8 engine requires 7.7 quarts (7.3 liters) of oil.
How many quarts of oil does a 2015 Ford F150 with a 5.0 take?
A 2015 Ford F150 with a 5.0L Ti-VCT V8 engine requires 7.7 quarts (7.3 liters) of SAE 5W-20 oil.
What oil filter does a 3.5 EcoBoost use?
The 3.5L EcoBoost V6 engine uses an FL-500-S oil filter.
How do I know what size oil filter I need?
To determine the correct size oil filter for your vehicle, you should consult the owner’s manual or contact the manufacturer. The correct size oil filter will be specified based on the make, model, and engine type of your vehicle.
Where is the oil filter on a 2015 3.5 EcoBoost?
The oil filter on a 2015 3.5L EcoBoost V6 engine is located on the top of the engine under a black plastic cover. The cover needs to be removed to access the oil filter.
How much oil does a 2015 Ford F-150 engine 3.5 L v6 take?
A 2015 Ford F-150 engine with a 3.5L Ti-VCT V6 engine requires 6.3 quarts (6 liters) of SAE 5W-20 oil.
What kind of oil does a 2015 Ford F-150 3.5 EcoBoost take?
The 2015 Ford F-150 with a 3.5L EcoBoost V6 engine requires SAE 5W-30 oil.
