Maintaining your 2011 Ford Ranger’s engine is crucial to its longevity and performance. One essential aspect of engine maintenance is selecting the right oil type, capacity, and filter.
In this article, we’ll discuss the 2011 Ford Ranger’s engine options, their respective oil types, capacities, and filters, and why using the right oil and filter matters.
So, let’s dive in!
For the 2011 Ford Ranger, there are 2 different engine options, each requiring specific oil types, capacities, and filters.
- The 2.3L I4 engine needs Motorcraft SAE 5W-20 Motor Oil with a capacity of 4.0 qt (3.8L), along with a Motorcraft FL-910-S Oil Filter.
- Lastly, the 4.0L V6 engine needs Motorcraft SAE 5W-30 Motor Oil with a capacity of 5.0 qt (4.7 L) and uses a Motorcraft FL-820-S Oil Filter for optimal performance and protection.
2011 Ford Ranger Oil Type, Capacity, and Filters (All Engines)
| Engine | Oil Capacity, incl. Filter | Oil Type | Filter |
|---|---|---|---|
| 2.3L I4 | 4.0 qt (3.8L) | SAE 5W-20 | FL-910-S |
| 4.0L V6 | 5.0 qt (4.7L) | SAE 5W-30 | FL-820-S |
It’s important to note that these capacities include the filter as well. Be sure not to overfill your engine with too much oil, as this can cause damage.
Engine Oil Types
Motorcraft SAE 5W-20 Motor Oil
Amazon Affiliate Link
Motorcraft SAE 5W-30 Motor Oil
Amazon Affiliate Link
Oil Filters
Motorcraft FL-910-S Oil Filter
Amazon Affiliate Link
Motorcraft FL-820-S Oil Filter
Amazon Affiliate Link
Read on for more information and engine oil specifications by each 2011 Ranger engine type. After reading this guide, you’ll get everything you need to change your 2011 Ranger engine oil and filter.
All this information is researched and put together from the official Ford resources, including the 2011 Ford Ranger Owner’s Manual and Ford.com.
Table of Contents
2011 Ford Ranger Engine Options
The 2011 Ford Ranger comes with two engine options:
- 2.3L I4
- 4.0L V6
Each engine option requires a specific oil type, capacity, and filter to ensure optimal performance and durability. Below, we’ll go over each engine option in detail.
2011 Ford Ranger 2.3L I4 Oil Type, Capacity, and Filter
For the 2011 Ford Ranger 2.3L I4 engine, use Motorcraft SAE 5W-20 Motor Oil, which provides optimal protection and fuel efficiency.
The oil capacity for this engine, including the filter, is 4.0 qt (3.8 liters).
The recommended oil filter is the Motorcraft FL-910-S Oil Filter, designed for optimal filtration and protection against contaminants.
Motorcraft SAE 5W-20 Motor Oil
Amazon Affiliate Link
Motorcraft FL-910-S Oil Filter
Amazon Affiliate Link
2011 Ford Ranger 4.0L V6 Oil Type, Capacity, and Filter
For the 2011 Ford Ranger 4.0L V6 engine, use Motorcraft SAE 5W-30 Motor Oil, ensuring the necessary protection and fuel efficiency.
The oil capacity for this engine, including the filter, is 5.0 quarts (4.7 liters).
The recommended oil filter for the 4.0L V6 engine is the Motorcraft FL-820-S Oil Filter, specifically designed for this engine and offers optimal filtration and protection from contaminants.
Motorcraft SAE 5W-30 Motor Oil
Amazon Affiliate Link
Motorcraft FL-820-S Oil Filter
Amazon Affiliate Link
It is important to avoid using SUPPLEMENTAL ENGINE OILS additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
Why Using the Right Oil and Filter Matters?
Using the correct oil type and filter for your 2011 Ford Ranger is essential for several reasons:
- Engine protection: The right oil and filter provide the necessary lubrication and protection for your engine’s internal components, reducing friction and wear.
- Fuel efficiency: Using the proper oil type can improve your engine’s fuel efficiency, saving you money at the pump.
- Emissions: The right oil type helps reduce emissions by ensuring your engine runs as efficiently as possible.
- Extended engine life: Using the correct oil and filter can prolong your engine’s life by preventing premature wear and damage.
| Engine | Oil Capacity, incl. Filter | Oil Type | Filter |
|---|---|---|---|
| 2.3L I4 | 4.0 qt (3.8L) | SAE 5W-20 | FL-910-S |
| 4.0L V6 | 5.0 qt (4.7L) | SAE 5W-30 | FL-820-S |
Use API-Certified Oils:
To ensure proper engine performance and protection, only use engine oils certified for gasoline engines by the American Petroleum Institute (API).
An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Council (ILSAC), which is comprised of U.S. and Japanese automobile manufacturers.
Useful Resources
2011 Ford Ranger Owner’s Manual
FAQs
What kind of oil does a 2011 Ford Ranger 2.3 L take?
For a 2011 Ford Ranger 2.3L I4 engine, the recommended oil type is Motorcraft SAE 5W-20 Motor Oil.
How much oil does a 2011 Ford Ranger 2.3 L take?
The oil capacity for a 2011 Ford Ranger 2.3L I4 engine is 4.0 qt (3.8L).
What kind of oil does a 2011 Ford Ranger 4.0 L take?
For a 2011 Ford Ranger 4.0L V6 engine, the recommended oil type is Motorcraft SAE 5W-30 Motor Oil.
How much oil does a 2011 Ford Ranger 4.0 L take?
The oil capacity for a 2011 Ford Ranger 4.0L V6 engine is 5.0 qt (4.7 L).
Conclusion
In conclusion, selecting the right oil type, capacity, and filter for your 2011 Ford Ranger’s specific engine is essential for optimal performance, fuel efficiency, and engine longevity.
By following the guidelines outlined in this article, you can ensure your Ranger runs smoothly and efficiently for many years to come.
Additionally, Ford strongly recommends using only genuine Ford, Motorcraft®, or Ford-authorized remanufactured replacement parts because they are engineered for your vehicle.
