If you own a 2010 Ford Escape, knowing the right oil type, capacity, and filter for your vehicle is essential for maintaining its performance and prolonging its lifespan.
In this article, we’ll discuss the various engine options, oil types, capacities, and filters for your Ford Escape, as well as explain the importance of using the right oil and filter.
Let’s dive in!
For the 2010 Ford Escape, there are 2 different engine options, each requiring specific oil types, capacities, and filters.
- The 2.5L I4 engine needs Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil with a capacity of 5.3 qt (5.0L), along with a Motorcraft FL-910 Oil Filter.
- The 3.0L V6 engine also uses Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil but has a capacity of 6.0 qt (5.7L) and requires the same Motorcraft FL-500-S Oil Filter.
2010 Ford Escape Oil Type, Capacity, and Filters (All Engines)
| Engine | Oil Capacity, incl. Filter | Oil Type | Filter |
|---|---|---|---|
| 2.5L I4 | 5.3 qt (5.0L) | SAE 5W-20 | FL-910 |
| 3.0L V6 | 6.0 qt (5.7L) | SAE 5W-20 | FL-500-S |
It’s important to note that these capacities include the filter as well. Be sure not to overfill your engine with too much oil, as this can cause damage.
Engine Oil Types
Motorcraft SAE 5W-20 Motor Oil
Amazon Affiliate Link
Oil Filters
Motorcraft FL-910-S Oil Filter
Amazon Affiliate Link
Motorcraft FL-500-S Original Oil Filter
Amazon Affiliate Link
Read on for more information and engine oil specifications by each 2010 Escape engine type. After reading this guide, you’ll get everything you need to change your 2010 Escape engine oil and filter.
All this information is researched and put together from the official Ford resources, including the 2010 Ford Escape Owner’s Manual and Ford.com.
Table of Contents
2010 Ford Escape Engine Options
The 2010 Ford Escape comes with two engine options:
- 2.5L I4
- 3.0L V6
Now let’s look at the oil type, capacity, and filter for each of these engines in detail.
2010 Ford Escape 2.5L I4 Oil Type, Capacity, and Filter
For the 2010 Ford Escape 2.5L I4 engine, you’ll need Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil which is API-certified, ensuring the best protection for your engine and emission system.
The oil capacity for the 2.5L I4 engine, including the filter, is 5.3 quarts (5.0 liters).
The recommended oil filter is the Motorcraft FL-910 Oil Filter, designed for optimal filtration and protection against contaminants.
Motorcraft SAE 5W-20 Motor Oil
Amazon Affiliate Link
Motorcraft FL-910-S Oil Filter
Amazon Affiliate Link
2010 Ford Escape 3.0L V6 Oil Type, Capacity, and Filter
For the 2010 Ford Escape 3.0L V6 engine, you’ll need Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil which is API-certified and offers excellent protection for your vehicle’s engine and emission system.
The oil capacity for the 3.0L V6 engine, including the filter, is 6.0 quarts (5.7 liters).
To maintain clean oil and protect your engine from contaminants, use the recommended Motorcraft FL-500-S oil filter for maximum efficiency.
Motorcraft SAE 5W-20 Motor Oil
Amazon Affiliate Link
Motorcraft FL-500-S Original Oil Filter
Amazon Affiliate Link
It is important to avoid using SUPPLEMENTAL ENGINE OILS additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
Why Using the Right Oil and Filter Matters?
Using the correct oil type and filter for your 2010 Ford Escape is essential for several reasons:
- Engine protection: The right oil and filter provide the necessary lubrication and protection for your engine’s internal components, reducing friction and wear.
- Fuel efficiency: Using the proper oil type can improve your engine’s fuel efficiency, saving you money at the pump.
- Emissions: The right oil type helps reduce emissions by ensuring your engine runs as efficiently as possible.
- Extended engine life: Using the correct oil and filter can prolong your engine’s life by preventing premature wear and damage.
| Engine | Oil Capacity, incl. Filter | Oil Type | Filter |
|---|---|---|---|
| 2.5L I4 | 5.3 qt (5.0L) | SAE 5W-20 | FL-910 |
| 3.0L V6 | 6.0 qt (5.7L) | SAE 5W-20 | FL-500-S |
Use API-Certified Oils:
To ensure proper engine performance and protection, only use engine oils certified for gasoline engines by the American Petroleum Institute (API).
An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Council (ILSAC), which is comprised of U.S. and Japanese automobile manufacturers.
Useful Resources
2010 Ford Escape Owner’s Manual
FAQs
What kind of oil does a 2010 Ford Escape 3.0 L take (2010 Ford Escape V6 Oil Type)?
For a 2010 Ford Escape 3.0L V6 engine, the recommended oil type is also Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil.
How much oil does a 2010 Ford Escape 3.0 L take (2010 Ford Escape V6 Oil Capacity)?
The oil capacity for a 2010 Ford Escape 3.0L V6 engine is 6.0 qt (5.7L).
What kind of oil does a 2010 Ford Escape 2.5 L take?
For a 2010 Ford Escape 2.5L I4 engine, the recommended oil type is Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil.
How much oil does a 2010 Ford Escape 2.5 L take?
The oil capacity for a 2010 Ford Escape 2.5L I4 engine is 5.3 qt (5.0L).
What filter does a 2010 Ford Escape take (2010 Ford Escape Oil Filter Type)?
The 2010 Ford Escape has two different oil filters depending on the engine type:
For the 2.5L I4 engine, the recommended oil filter is the FL-910.
For the 3.0L V6 engine, the recommended oil filter is the FL-500-S.
Conclusion
In conclusion, always use API-certified oils, such as Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil, and the recommended filters (Motorcraft FL-910 for the 2.5L I4 engine and Motorcraft FL-500-S for the 3.0L V6 engine) to maintain the performance, fuel efficiency, and longevity of your 2010 Ford Escape.
By following these guidelines, you’ll ensure that your vehicle remains in top condition for years to come.
